Akai UniBass UB1 Bass Octave Overdrive pedal
Highlights:
-
used but all original and fully functional , this akai uni bass is a really cool pedal. Solid, well built and with a lots of cool sounds. Input gain and output level controls are key. For a cool ring mod kind of sound keep the input gain very low and play several tones at once. The “down a forth” function creates power chords which are cool for a synthlead type sound. The “up a fifth” is also cool. It creates this cool decay sound as the signal fades. Great for increasing the range of any instrument or generator.
$390.00
Crew Maniac Sound SVD-001 Guitar and bass overdrive pedal – Boutique Japanese Pedal
Highlights:
Rare boutique Handmade Japanese overdrive pedal. Works great for bass as well as guitar thanks to the bass boost. Works like new , and comes with the original power supply. Item Description CREWS MANIAC SOUND / SVD-001 The VVD-001 has a clean blend knob, which retain low end even when set to a fairly high gain. Works amazing on bass. With a 3 bands EQ that can boost and cut +/-12dB from the center click flat. This allows you to use it for everything ,from a slightly gainy tone to a full overdrive tubescreamer style . When bypassing, it passes through a buffer circuit, which keeps the tone clean. Can be used with 9-15V.
$300.00
Fulltone Fulldrive 2 MOSFET Overdrive Pedal
Highlights:
-
Great American hand made built pedal , very clean and perfectly working. Housed in a beautiful powder coated Blue 16ga. steel enclosure, the dual-channel Full-Drive 2 Mosfet gives you the best of both worlds. The first channel is the Overdrive Mode, capable of clean boost or non-compressed overdrive or choose light to medium softer overdrives all while retaining your guitar’s original tone. The Tone knob is a very effective presence control that can smooth out or add upper harmonics. The second channel is the “Boost Mode” with its own separate distortion control for medium to higher gains with a more singing violin-like sustain! One mini-toggle lets you choose between a “Vintage” FD2 sound with mid-heavy tones that cut through the mix and “FM (flat-mids)” for a more natural, transparent sound that works awesome with a Strat’s neck pickup. The other mini-toggle lets you choose between Mosfet and Normal clipping modes. Normal mode is even more asymmetrical, sweeter and more open, with no “blanket” over the sound. And, of course, the FD2-Mosfet features super-bright LEDs and Fulltone’s exclusive “no-thump/no-pop” True Bypass switches. We are the first to offer a switchable “Boost” Channel in an overdrive and the first only to manufacture our own Super-Duty 3PDT footswitch allowing True-Bypass plus LED
$220.00
Fulltone Fulldrive 2 V2 with box and manual
Highlights:
-
Fulltone
Discontinued pedal in brand new condition with original box and manual Loaded with the coveted JRC4558 chip and Fulltone’s 1990s Full-Drive circuit, this pedal juices your amp with classic overdriven textures. One footswitch places the pedal in and out of your effects chain, while a second switches between overdrive channels 1 and 2, each with individually adjustable Volume and Drive knobs. But if you think the Full-Drive 2 V2 limits you to these two options, you’re mistaken. Call up everything from vintage overdriven warmth to ’90s-style asymmetrical clipping using twin toggle switches. Fine-tune your tone by tweaking the Full-Drive 2’s variable 9–18-volt operation
$250.00
PETE CORNISH DB-1 BASS DRIVE PEDAL WITH BOX AND MANUAL – AS NEW
Highlights:
Rare and barely used BD-1 Bass Drive Battery Free Pedal made by Pete Cornish , with Original Box and manual. The BD-1™ is not a variant of any existing product but a completely new and original design. Initially designed for Bass Guitar, the BD-1™ has also proved very popular with Baritone Guitars and dropped tuned Guitars when heavy overdrive is required at the lower frequencies of these instruments. With Germanium components for added musicality this new design features full Bottom-End retention and is flat down to below the bottom B on five string basses. The tone controls are very powerful and feature an active boost and cut with a combined range of 34dB at maximum settings. Being active, the two tone bands can be both cut and boosted as desired with the zero or neutral point being 12 o’clock on each control knob. I have included a second linear boost stage after the tone circuit to compensate for any reduction in overall volume when the tones are in “cut” mode. The benefits of this active tone circuit, compared to the usual passive (Cut only) tone circuit is that the two bands are completely independent and there is no interaction between the Bass and Treble tone controls. An output Master Volume is included to allow for perfect matching between bypassed and overdriven and EQ’d signal level and there is plenty of signal headroom available to overdrive amp inputs if required. My well established Class A input buffer and radio frequency suppressor is, of course, included and the output buffer impedance is low to easily drive long cables or other loads without loss of signal or tone. TECHNICAL SPECIFICATIONS: Overall boost with Gain = 100% and Volume = 100% is +55 dB {Reference: input = -52dBm(V) and output = +3dBm(V)} Overall boost with Gain = 0% and Volume = 100% is +19 dB {Reference: input = -16dBm(V) and output = +3dBm(V)} The above with Bass and Treble set to 50% (Neutral point). Bass Control range +16/-13dB @ 30Hz Treble Control range +12/-18dB @ 3KHz Maximum signal output with Volume 100% is +10dBm(V)/ 2.5vrms/6v Peak to Peak (at clip point) FEATURES: High Impedance RFI rejecting input and bypass buffer. Each unit is hand built, wired and tested by Pete, Lynda and Mingus Cornish. Housed in a Rugged Die-cast box with easy to set Number Knobs. Heavy Duty all-metal footswitch with Hi-Brite LED. Dimensions: 145 X 95 X 49 mm
$950.00
Rare Blue Fulltone BassDrive pedal – Serial 299
Highlights:
Original Fulltone Bassdrive from the first Run. These early ones have a blue casing like the FULLDRIVE , different knobs, a push pull comp cut instead of a switch and bass drive on a label instead of printed directly on the pedal. The pedal works flawless and has a few scratches on the outside. Serial number is #299.
$600.00
Rare Mu-tron Green Octavider Pedal with original box
Highlights:
Very rare and sought after green (version 3) mu-tron octavider pedal with the original box in perfect condition. The OCTAVIDER creates a thick analog octave-down and a fuzzy ring modulated octave-up tone , in a pedalboard-friendly size and powered by industry-standard 9V DC. The OCTAVIDER pairs amazingly well with the Micro-Tron III and tracks steady on guitar, bass, keyboards and horns. Turn your instrument into a fat monophonic synthesizer. The Mu-Tron OCTAVIDER makes the full, harmonically rich option of “playing in octaves” available to all horn and stringed instrument players. This live effect is created by newly developed circuitry that analyzes the original signal and “pairs” it with the note one octave below, matching tone color and dynamics over an exceptionally wide range. The unique “stabilization” circuit (patent pending) enables the Mu-Tron OCTAVIDER to “lock into” the musical tone and sound a simultaneous sub-octave with accuracy that is not found in any other device. An important advance in electronic music technology, the OCTAVIDER has the same quality, ruggedness, and reliability that makes Mu-Tron the first choice of professional musicians. The RINGER Provides multiple effects of distortion, extra note generation, and a kind of “octave up” effect. RINGER effect is added to output, regardless of MIX. The more “pure” the instrument tone, the stronger the “octave up” effect. For the strongest “octave up”, turn MIX full down to eliminate the originally played register.STRINGED INSTRUMENTS: neck pick-up tone down, volume up full. (GUITAR, play from tenth fret up on all strings.) Two notes played simultaneously will beat with each other, producing “extra” notes. Try parallel fourths, fifths, or other simple chords. MIX full up.WIND INSTRUMENTS: play with clear “round” tone. The OCTAVIDER can be used successfully with many other devices, but the OCTAVIDER must be the first to receive the signal from the instrument. The OCTAVIDER followed by a Micro-Tron III or a Mu-Tron BI-PHASE are especially effective. Features: The ability to preserve dynamics and harmonic content of the original signal in the sub-octave. A stabilization circuit that “locks into” all single-voiced signals. A tone color control for sub-octave. A ringer circuit for harmonic emphasis of upper tones, and special multi-note effects. A novel mixing circuit with BASS ONLY switch for extended range and dramatic effects. Auxiliary impedance-compensated output. LED (light emitting diode) indicators to show operating status of effects. 89V DC powered in rugged Mu-Tron enclosure. Controls: Mix controls the mix between the direct signal and the effect signal Tone (Lo-Hi) controls the tone Ringer (On/Off) adds slight octave up and fuzz tone Stabilize (On/Off) provides note tracking stability Bass Only (On/Off) takes out the input signal Specifications: 1/4″ Input Jack 1/4″ Output Jack 9V DC Weight: 1 lbs Dimensions: 4.75″ x 2.5″ x 2.25″
$350.00
Rare Wrought Iron Thruster N1 Handmade Germanium Fuzz – US boutique pedal
Highlights:
Super rare pedal complete with manual and original box. Less than 100 made and he is not making these anymore. From their website: The N-1 is a 4 Stage Germanium transistor Fuzz with a crazy oscillation switch. It feature NOS Soviet Transistors and ammeter with acid-etched graphics on a medium weathered Cold War Red powder coated enclosure. Each N-1 is almost completely hand-built. I start with laser cut aluminum plate, but from there, I do everything myself in the Wrought Iron shop. Metal prep, acid etching of graphics, powdercoating, bending the plates to shape, sanding the graphics, polishing, waxing, building & wiring the circuits, pedal assembly, and final testing and tweaking. These are truly hand-built pedals. Note: Due to the extreme hand built nature of the N-1 Germanium Carrier Rocket pedal and the fact that each enclosure is individually acid etched, your pedal will be unique. Some have a little more aggressive etch, some have a little less aggressive.
$650.00